TenTec
[Top] [All Lists]

Re: [TenTec] Intermitten Omni VI RX Falloff

To: tentec@contesting.com
Subject: Re: [TenTec] Intermitten Omni VI RX Falloff
From: "Dr. Gerald N. Johnson" <geraldj@weather.net>
Reply-to: geraldj@weather.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 19 Aug 2010 22:20:59 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Aux RX switch on the back of the radio. Needs cleaning.

73, Jerry, K0CQ

On 8/19/2010 10:15 PM, Art Trampler wrote:
> Hey All,
>
>
>
> On my Omni VI Opt 3, the RX periodically drops off 20 to 25db, using a
> 6db/S-unit scale.  If I wiggle the RF gain it can pop back, or if I go key
> down for one “dih.”  I haven’t tried simply closing the PTT to restore (as
> opposed to any transmission) but I think that would also do it.
>
>
>
> I’d think “Relay” or “Diodes” if it only popped back with closing the
> PTT/sending; I’d think bad solder joint if it was only the RF gain.  What’s
> interesting is that the RX is not lost, just significantly
> reduced/attenuated.
>
>
>
> Your thoughts?
>
>
>
> Thanks,
> Art
>
>
>
> Art Trampler, KØRO
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>