TenTec
[Top] [All Lists]

Re: [TenTec] Popping in O1 audio during AF adjust

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Popping in O1 audio during AF adjust
From: Reed Krenn <reed.krenn@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 14 Jul 2010 18:50:12 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I misspoke; mine also occurs with rotation of either of the VFO encoders.

-- Reed / WW3A

On Wed, Jul 14, 2010 at 6:45 PM, Reed Krenn <reed.krenn@gmail.com> wrote:

> I just shipped my (Classic) Orion to Ten Tec *today* for the exact same
> problem.
>
> I'll report the results to the reflector.
>
> Reed / WW3A
>
>
> On Tue, Jul 13, 2010 at 11:30 PM, art davis <n4uc@hotmail.com> wrote:
>
>>
>> My O1 (2.0.6.2a) has recently developed a popping in the left audio
>> channel of the headphone output when adjusting the volume of either the MAIN
>> or SUB AF. The rate of the popping seems to be in sync with the rotation of
>> the AF controls (optical encoder?) and its volume goes up and down with the
>> audio volume. In the headphones it sounds just like you ears popping during
>> flying or diving under water. The popping is not affected by the mode, RF
>> gain, sidetone volume, MON setting, or any other front panel control
>> setting, except as described for the AF controls.
>> Any ideas?
>>
>>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>