TenTec
[Top] [All Lists]

Re: [TenTec] Ten-Tec 411 Centaur Amp Problem

To: "Discussion of Ten-Tec Equipment " <tentec@contesting.com>
Subject: Re: [TenTec] Ten-Tec 411 Centaur Amp Problem
From: "Jim Brown K9YC" <k9yc@audiosystemsgroup.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 31 May 2010 13:19:38 -0700
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
On Mon, 31 May 2010 15:55:31 -0400, wow_chf@hotmail.com wrote:

>I submitted the article draft to QST, and it was questioned by the Technical 
>Review folks, and although I have been published in QST before, they could 
>not see how this would "transform" the apparent input SWR.

Because it's a POOR fix for the fundamental problem, which is something wrong 
in the input circuit of the power amp causing a mismatch. The proper fix is 
to find and correct the problem in the input circuit. Adding coax is a band-
aid. 

73,

Jim K9YC



_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>