I had a similar problem a couple years ago with my Pegasus. Ten
Tec had the relay in stock at a very attractive price. I bought
enough to replace all the relays on the low pass board and replaced
them all while I was at it.
Check with Ten tec.
73,
-Lee-
WA3FIY
On 29 Mar 2010 at 12:33, Dr. Gerald N. Johnson wrote:
> Newark lead time 104 days. Not quite a stock item. Mouser lists them
> too, but none in stock, ask for a quote to get lead time. Digi-Key
> doesn't admit the part. Farnell UK says they will get them from their US
> branch, Newark who doesn't have any.
>
> Looks like unobtanium. Don't wreck any unless TenTec has a stock. It
> could be that there is a no lead replacement that a simple search on the
> part number doesn't show except that Farnell says it is ROHS compliant.
>
> Could it be a problem of contact oxidation? Where there needs to be some
> DC run through the contacts ala telephone office sealing current and a
> factory mod for the TS430S a few years ago?
>
> 73, Jerry, K0CQ
>
> On 3/29/2010 12:04 PM, phil g wrote:
> > Here is a link to the relay. Also avail. from Ten Tec.
> > http://www.newark.com/jsp/search/productdetail.jsp?SKU=45M7086
> >
> > Fairly straight forward to replace. Unsolder the old, solder in the new.
> >
> > n4zsa
> >
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> Internal Virus Database is out of date.
> Checked by AVG - http://www.avg.com
> Version: 8.0.138 / Virus Database: 270.6.6/1623 - Release Date: 8/20/2008
> 8:12 AM
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|