Kevin - Check your Filter tap settings
MENUS>FILTER>DSP FILTER LENGTH> set it to 199 and see if it goes away .
73 Hank K7HP
> the radio back in about two weeks with an explanation that they could not
> duplicate the issue; however they had replaced a couple of capacitors as
> a
> precaution. Well that didn't fix the problem. After a few more weeks of
> getting to know the Orion 2 I noticed an additional issues that might be
> related. When the bandwidth/filters are set to it minimum setting (only
> checked
> in CW mode) and then return to some setting above 1500 or so, the audio
> becomes distorted with a high pitched ring. The problem will resolve
> itself if
> the rig is cycled off and then on again. I have been a Ham for many
> years,
> and have had many rigs, but this is my first SDR radio. Are all these
> things normal? Is it something that the new firmware will fix?
> Any guidance would be greatly appreciated.
>
> Thanks,
> Kevin Santine - N5FXV
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|