If you are trying to use the model 217 (a 9 MHz filter) in the 6.3 MHz
IF (the PBT board) it is not going to work.
I don't know the Corsair well enough to say for certain, but if it is
like the early Omnis, it does not have selectable filters in the 9 MHz
IF. You may be able to put the 217 in place of the "normal" 9 MHz IF
filter. The rig would then become a CW only rig, because the normal
filter is used both for receive and for unwanted sideband rejection in
transmit. You would have a very narrow SSB transmit signal indeed. Not
likely to be usable.
DE N6KB
g p wrote:
> The PBT does not work when in the narrow position. The signal is always there
> from one end of the PBT to the other, in other words....it does not affect
> the signal at all.
>
> Like I mentioned before, the narrow filter picks up signals but the very
> strong only and the signal drops, weaker signals disappear in the white noise.
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|