Keith, that's the way my O Classic works too. I think that is the correct
action for high cut. I take advantage of this feature by leaving the "CUT"
control set to high cut ("H") and the PBT/BW control set to "PBT". This way
I have a control dedicated to each function. I change bandwidth with the
CUT control and change passband tuning with the PBT/BW control.
-Lee-
WA3FIY
On 22 Nov 2009 at 3:28, ac9s@mchsi.com wrote:
> Although I rarely use the the "Cut" control, I was playing with it
> today and noticed that "high" and "low" cut seem to have different
> actions. Low cut appears to act as advertised, with the passband
> shifting and bandwidth changing in tandem as the control is rotated.
> The "high" cut appears to only change the bandwidth. Thinking this
> might be related to the sideband I tried both lower and upper sideband
> with the same result. I am using the current Beta - 2.041XT.
>
> Anyone else notice the same behaviour?
>
> Thanks --
>
> Keith
> AC9S
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|