Hi All,
This past week I added a 'new to me' Omni VII to the shack along with
the #715 speech processor. The rig has been excellent so far expect for
one glitch that is avoiding any remedy I try.
I am using a TT 705 microphone, When I feed it into the Omni VII via a
TT #710 4 to 8 pin mic adapter I get stellar audio reports. But when I
feed it through the #715 to the rig I get reports of significant RF on
my TX audio whether or not the #715 processor is in-line/active or bypassed.
I have used the 715 on my Omni V.9 using the same mic with no problem.
I have also noticed that the Omni VII audio/mic gain seems really 'hot'
(i.e. excess gain) requiring me to run it at no more than 10% open. Is
this normal?
Anyone else have a similar situation and/or a possible solution? Please
reply off list.
Thanks to all in advance.
BTW this is a really excellent receiver with a nice features set
73 de N1LQ-Dave
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|