Hello,
After reading jupiter documentation and some posts on the mailing
list, I don't understand how does ALC indicator work ?
In CW mode : ALC is lighting with dot or dash transmit.
In SSB mode : ALC is blinking with voice peak, the MIC gain shall be
adjusted for this.
PSK31 : ALC LED must not be lighted.
I noticed sometimes that (in SSB mode) ALC LED didn't light even if
Mic Gain was at maximum. For ALC blinking, I shall decrease output
power from 100 to 92 %.
I noticed this case when SWR was about 1.6 , 1.7
Why ?
Thanks for your help.
Best 73's
Herve F8EHJ
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|