Jerry
?what is the pin1 issue?
? the problem is on receive audio.
dale wt4t
-----Original Message-----
From: Dr. Gerald N. Johnson <geraldj@storm.weather.net>
To: tentec@contesting.com
Sent: Sun, 29 Mar 2009 9:58 am
Subject: Re: [TenTec] poor audio on OMNI-V
On Sun, 2009-03-29 at 09:30 -0400, Carter wrote:
> yash@aol.com wrote:
> > ?? I talked to the guy I just bought the OMNI-V from. His story is
> > this. He operates 99% of the time? cw on 80. He decided to go to 17
> > ssb one day and found the problem I have ,very distorted audio
>
> Sorry, I tuned in late and missed most of the correspondence on this
> issue, so pardon me if it has already been addressed...
>
> ..but just going by the very simple, one sentence description of the
> problem above, are you sure that it is not RF getting into the radio on SSB?
>
> Have you tried it into a dummy load to see if the problem goes away?
> Possibly the dreaded "pin 1" issue?
>
> Good luck!
>
> Carter K8VT
>
>
Sounds bad on receive.
73, Jerry, K0CQ
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|