TenTec
[Top] [All Lists]

Re: [TenTec] RF Gain and AGC Question

To: <geraldj@storm.weather.net>, "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] RF Gain and AGC Question
From: "Phil Chambley Sr." <k4dpk@comcast.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 28 Jan 2009 17:46:40 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Yes.  AGC is on when the button is OUT.  The legend is on the RH end of the 
row of buttons.

Phil C. Sr.
k4dpk
----- Original Message ----- 
From: "Dr. Gerald N. Johnson" <geraldj@storm.weather.net>
To: <tentec@contesting.com>
Sent: Wednesday, January 28, 2009 4:25 PM
Subject: Re: [TenTec] RF Gain and AGC Question


> On Wed, 2009-01-28 at 14:52 -0600, Bruce Warner wrote:
>> Hi - just a follow up - I appreciate the advice and wanted to just ask on 
>> Walt's advice versus Carter's.  Walt indicated to make sure the AGC 
>> on/off button is in the OUT position (meaning it's off - with the 
>> inference that it's best to not use the AGC on the rig).  Then Carter, 
>> you said follow Walt's advice and make sure the AVC is on.  Possibly a 
>> dumb question here but is AGC the same thing as the AVC?  Is the 
>> recommendation from you both to just leave the AGC button in the out (or 
>> off) position?
>>
>> Thanks guys.
>>
> You will be happier with the AGC/AVC ON than off. Your complaint about
> distortion with the RF gain all the way up is a classic symptom of
> faulty AGC or AGC turned off. I gather that the button out is AGC ON,
> but I've not become that closely acquainted with the OMNI VI since it
> has other habits I don't appreciate.
>
> 73, Jerry, K0CQ
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec 

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>