TenTec
[Top] [All Lists]

[TenTec] Need physical dimensions (width across the front) for 962 or 96

To: tentec@contesting.com
Subject: [TenTec] Need physical dimensions (width across the front) for 962 or 961 power supply
From: Jerry Volpe <kg6tt@arrl.net>
Reply-to: kg6tt@arrl.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 22 Jan 2009 14:21:12 -0800
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I need the physical dimensions for the Model 962 or 961 power supplies. 
This information is not in the manuals. I have an Omni-V and 962 coming 
to the shack and I have to modify a part of the shack shelving. My 
primary concern is the width dimension.

Do you have a 962, 961, or even a 960 in front of you? If you do can you 
measure it across the front and let me know what it is?


73,

Jerry, KG6TT

-- 
Ralph Jerald "Jerry" Volpe
Amateur Radio Operator KG6TT
ARRL Member & VE
FISTS 12304

788 Chestnut Drive
Fairfield, CA 94533

kg6tt@arrl.net

510 325-7724
707 399-8838 FAX





_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Need physical dimensions (width across the front) for 962 or 961 power supply, Jerry Volpe <=