TenTec
[Top] [All Lists]

[TenTec] Ten Tec OII - SSB Distortion

To: tentec@contesting.com
Subject: [TenTec] Ten Tec OII - SSB Distortion
From: ac9s@mchsi.com
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 13 Jan 2009 20:56:29 +0000
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
>Can't speak for the Orion but as to the Omni VII, there is a hardware gain 
>that may need to be adjusted.  If your DSP mike gain is running at 30% or 
>less then I suggest that you reduce the hardware gain.  Good and healthy DSP 
>mike gain value is in the 30% to 50% range.  If you should overdrive the 
>input stage, pre DSP gain, then any distortion generated in the 1st stage 
>will be passed along and no amount or reducing the DSP gain will clear the 
>distortion.

>73
>Bob, K4TAX


>----- Original Message ----- 
>From: "Mark DeBord " <markinkpt@hotmail.com>
>To: <tentec@contesting.com>
>Sent: Monday, January 12, 2009 9:51 AM
>Subject: Re: [TenTec] O2 - SSB distortion


> Check the mic gain. The Orions, Omni VII, and Jupiter will overdrive and 
> it sounds exactly like RF. Your ALC should only flicker on some words. 
> Check the menu to make sure the menu mic boost was not accidentally 
> increased.
>
> Mark ka4ick

As originally reported, I have been experiencing really distorted SSB with my 
OII for the last 3 - 4 weeks - after receiving glowing reports for the last 2 
years.  I have partially 'cured it', but don't have the root cause nailed yet.  
A master reset will restore the radio to its excellent state, but it appears my 
problem reappears after checking into a 160 meter AM net we have locally on 
Sunday mornings.   160 Meter AM operation is always distorted and once I have 
operated 160 I then have the problem on all other bands with SSB.  A master 
reset now gets me back in operation, but I don't know what is triggering the 
problem.   This Sunday I used  my 756Pro and received excellent audio reports 
on the net.  I switched to the Orion and had the distorted report.  Asked the 
guys to switch mode, did a master reset and had excellent audio reports on SSB, 
which I then validated on 40 and 20..  So - it looks like AM operation on 160.  
Maybe There is enough RF floating around the shack 
 on 160 o scramble its little brain, but I have always thought the Pro more 
succeptable to RF than the O2 and I don't have any evidence of RF in the shack. 
 

Does this trigger any thoughts?  I can work around the problem, but clearly 
something is wrong. 

Thanks --

Keith
AC9S
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>