I don't know the Rascal interface box but I am running PSK31 on my Orion II
using the US Interface Navigator. I have the O II AUX gain set all the way
up at 100 and control the audio input level with the Navigator. If the Rascal
does not have such a facility then you can control it at the computer.
73 Ray W2RS
In a message dated 12/27/2008 4:03:24 P.M. GMT Standard Time,
W3ETC@thecumminsgroup.com writes:
Hello all:
I am trying to get my Orion II running 2.039D to run PSK 31 using Digipan
and WinPsk. I seem to be having a bit of difficulty with the Orion
settings. I am using a Buxcom Rascal box with a straight thru Din cable and
I can receive and decode fine on the laptop. I can transmit on the Orion,
and can hear it on an external receiver transmitting PSK 31 but there does
not appear to be much if any drive to the transmitter. The transmit light
on the Orion does not light and the meter does not move. My external tuner
(LDG Z 11 Pro) also does not light either as it does in SSB mode.
I have the Orion using the aux mode as the input with the gain up to 60.
The CW selection is set to MOX and the TX EQ is 0.00 db.
Any suggestions as to drive settings on the Orion II would be most
appreciated ?
73s
Ed W3ETC
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
**************One site keeps you connected to all your email: AOL Mail,
Gmail, and Yahoo Mail. Try it now.
(http://www.aol.com/?optin=new-dp&icid=aolcom40vanity&ncid=emlcntaolcom00000025)
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|