Keep in mind that "some" electronic ballasts are allowed higher RF emissions.
My former company built a multi-million dollar training facility and found out
that none of the RF based wireless remotes used for slide projectors and other
similar devices (VHF pagers) would work in the building. I was called in to
figure out the problem and determined the lighting circuits (and the ballasts)
were radiating between 150 MHz and 500 MHz but were within the FCC limits for
that class device. The ballast manufacturer and supplier provided the
replacement projectors and remotes rather than fix the problem.
Best regards,
CSM(r) Gary Huber - AB9M
9679 Heron Bay Rd
Bloomington, IL 61705
(309-662-0604)
www.csm-gh.com
glhuber@msn.com
gary.huber@us.army.mil
--------------------------------------------------
From: "Jim WA9YSD" <wa9ysd@yahoo.com>
Sent: Monday, December 08, 2008 4:14 PM
To: <tentec@contesting.com>
Subject: [TenTec] OT Florescent Ballast's
> At work in one of the office of the carpenter shop we had rebuilt a 4 foot
> florescent fixture with T8 tubes and a new style electronic ballast. The
> radio which was tuned to an FM station, had a lot of white noise and could
> not hear the station very well. I turned off the lights and the noise
> disappeared. So be aware of this situation. So much for meeting FCC
> emission specifications.
>
> Keep The Faith, Jim K9TF/WA9YSD
>
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|