TenTec
[Top] [All Lists]

[TenTec] Omni VI Option 3 loaded for sale

To: tentec@contesting.com
Subject: [TenTec] Omni VI Option 3 loaded for sale
From: d.e.warnick@comcast.net
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 02 Dec 2008 20:13:12 +0000
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Much as I hate to do it, it is time to part with one of my Omni 6 Option 3 
rigs. I just can?t support four rigs at this time.
 
This is a beautiful transceiver that works as it should. I know of no issues 
with it. Details of the configuration of the rig are as follows:
 
TenTec Omni VI Opt 3 Ser. No. 40A10082
          TenTec TCXO
          TenTec Model 288 Xtal Filter
                    1.8 KHz at 6.3 MHz IF
          TenTec Model 285 Xtal Filter
                    500 Hz at 6.3 MHz IF
          TenTec Model 282 Xtal Filter
                    250 Hz at 6.3 MHz IF
          TenTec Model 219 Xtal Filter in the N1 position
                    250 Hz at 9 MHz IF
          TenTec Model 216 Xtal Filter for RTTY in the N2 position
                    500 Hz at 9 MHz IF
 
With all 5 filters equipped and a TCXO, this is a great rig ready for 
contesting, chasing DX or just plain rag chews. It is proven on CW, SSB and the 
digital modes.
 
I am a non-smoker and the previous owner was a non smoker. There are absolutely 
no signs or smells of smoking around this transceiver.
 
I have used this rig with N1MM logger for control and contesting as well as 
with MixW2 software for RTTY and PSK-31. All remote functions and logging work 
very well through both computer programs.
 
Output is as it should be. QSK is legendary TenTec. That means that it is 
great. All bands work.
 
Of course, the TenTec manual is included.
 
My prices include shipping and insurance. No need to add additional charges. I 
accept PayPal, USPS Money Order or personal check. Please understand that a 
check must clear before shipment can be made.
 
Total price including shipping and insurance is $1450.00
 
The transceiver and manual will be very carefully packed and protected to 
arrive ready to go on the air. This is a fully working rig. As with electronic 
equipment, however, it is sold as is.
 
Please respond to my e-mail directly. No need to bother the group with our 
communications.
 
Thanks for looking
 
Dave
WA3MKB
 
 
p.s.  You can have this great transceiver in time for Christmas
 
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Omni VI Option 3 loaded for sale, d . e . warnick <=