As far as the popping it sounds like you may have the AGC turned off. There is
a mod that I used many years ago on another TenTec rig on the AGC to stop the
popping it was simply a larger capacitor and/or resistor change.
--- On Sat, 11/8/08, d.e.warnick@comcast.net <d.e.warnick@comcast.net> wrote:
> From: d.e.warnick@comcast.net <d.e.warnick@comcast.net>
> Subject: Re: [TenTec] Omni V problem, need help
> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
> Date: Saturday, November 8, 2008, 9:29 AM
> Good call Steve. It's the asame on all 3 of my Omni
> VI's
> Dave
>
> -------------- Original message --------------
> From: Steve Hunt <steve@karinya.net>
>
> > Gil,
> >
> > Have you checked the setting of the PassBand Tuning -
> that would be an
> > obvious reason for USB and LSB to sound different. I
> find on my Omni VI
> > the correct tuning doesn't quite correspond to the
> mid-position of the knob.
> >
> > 73,
> > Steve G3TXQ
> >
> >
> > > Second SSB receive sounds fine on LSB, on USB
> sounds tiny with no bass or body
> > to the audio, adjusting C6 on the BFO board brings a
> little more body to the
> > audio but throws it off frequency.
> > >
> > > Any help I can get with these problems would be
> appreciated, I would hate to
> > return the rig, it is awesome other wise.
> > >
> > > Gil n2wjw
> > >
> > >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|