I have the manual now. Thanks to those who helped out. The 229 is
fast becoming my favorite tuner.
Vy 73,
doug
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com] On Behalf Of
tentec-request@contesting.com
Sent: Wednesday, October 01, 2008 11:00 AM
To: tentec@contesting.com
Subject: TenTec Digest, Vol 70, Issue 1
Send TenTec mailing list submissions to
tentec@contesting.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/tentec
or, via email, send a message with subject or body 'help' to
tentec-request@contesting.com
You can reach the person managing the list at
tentec-owner@contesting.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of TenTec digest..."
Today's Topics:
1. Omni VII Rack Mount (Fernando Quinones)
2. Model 229 Antenna Tuner manual (Speer, Doug)
3. Re: Omni VII Rack Mount (Fernando Quinones)
4. Ten Tec Argonaut V for sale (Dave)
5. Re: RIT/XIT problem solved!!!!!!!!!!! (n4py@arrl.net)
6. Re: Successful Upgrade of Old Jupiter (Ken Scheper)
7. Ten-Tec used/demo list October 1, 2008
(Ten-Tec Amateur Radio Sales)
----------------------------------------------------------------------
Message: 1
Date: Tue, 30 Sep 2008 10:58:32 -0700
From: Fernando Quinones <n2fq@sbcglobal.net>
Subject: [TenTec] Omni VII Rack Mount
To: TenTec@yahoogroups.com
Cc: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Message-ID: <513C8B23-64A6-42E0-ABF8-16A27144B14E@sbcglobal.net>
Content-Type: text/plain; charset=US-ASCII; format=flowed
Hello.
Anyone know if the Rack Mount Kit for the Omni will work with
the Jupiter?
I see from the specs that:
(HxWxD) Omni Vll is (5.0x12.0x14.75)
Jupiter is (5.0x12.125x13)
tnx.
Fernando N2FQ
------------------------------
Message: 2
Date: Tue, 30 Sep 2008 15:21:39 -0500
From: "Speer, Doug" <Doug.Speer@FairbanksMorse.com>
Subject: [TenTec] Model 229 Antenna Tuner manual
To: <tentec@contesting.com>
Message-ID:
<1D095086915A3E4F801FA6C08EBDD9BE01AB5785@fme0ex02.login2.EnProIndustrie
s.com>
Content-Type: text/plain; charset="us-ascii"
I'm looking for a manual for the Ten-Tec Model 229 antenna tuner. Does
anyone have a scanned (.PDF or .TIF) file of the manual you could e-mail
me.
Doug, W9PN
Janesville, WI
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com] On Behalf Of
tentec-request@contesting.com
Sent: Tuesday, September 30, 2008 11:00 AM
To: tentec@contesting.com
Subject: TenTec Digest, Vol 69, Issue 30
Send TenTec mailing list submissions to
tentec@contesting.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/tentec
or, via email, send a message with subject or body 'help' to
tentec-request@contesting.com
You can reach the person managing the list at
tentec-owner@contesting.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of TenTec digest..."
Today's Topics:
1. Re: Ashing for advise please! (RaySoifer@cs.com)
2. Switching speed of a Omni 6 plus (Tim Randa)
3. Re: Switching speed of a Omni 6 plus (CSM(r) Gary Huber)
4. Successful Upgrade of Old Jupiter (wo8l@aol.com)
5. Re: Successful Upgrade of Old Jupiter (Henry Mackey)
6. Re: Successful Upgrade of Old Jupiter (n4py@arrl.net)
7. Re: Ten Tec 40th Keyer Paddels (Bill Miner)
8. Re: Successful Upgrade of Old Jupiter (John T. Fleming)
9. Re: Successful Upgrade of Old Jupiter (n4py@arrl.net)
10. Orion (original) For Sale (jmalloy)
----------------------------------------------------------------------
Message: 1
Date: Mon, 29 Sep 2008 13:18:59 -0400
From: RaySoifer@cs.com
Subject: Re: [TenTec] Ashing for advise please!
To: tentec@contesting.com (Discussion of Ten-Tec Equipment)
Message-ID: <75748611.65FA385E.027E8134@cs.com>
Content-Type: text/plain; charset=iso-8859-1
I have had good results with the Hy-Gain AV-640. It requires no guys,
at least for those of us who don't live in the hurricane belt (winds of
70-75 mph or less) and is designed to be mounted at least 8 ft above
ground. Mine is on a 10 ft pipe mast.
73 Ray W2RS
"John" <brazos@rochester.rr.com> wrote:
>I have good luck in the past with two verticals Gap and butternut my
advise
>would be keep them on the ground and run at least 8 or 10 ground plane
wires
>in length according to the manufacture . ?I wouldn't take anything from
mfg
>if they gave it to me ! ?good luck John kb2huk
>----- Original Message -----
>From: "Stephen M. Shearer" <wb3lgc@verizon.net>
>To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
>Sent: Sunday, September 28, 2008 10:00 PM
>Subject: Re: [TenTec] Ashing for advise please!
>
>
>>
>>
>> I have a Cushcraft R-8 vertical.
?http://www.cushcraft.com/amateur/r8.htm
>> I have been very happy with it.
>> 15' above the ground on the back of my garage.
>> See reviews at:
>> http://www.eham.net/reviews/detail/804
>>
>> 73, Steve WB3LGC
>>
>>
>> -----Original Message-----
>> From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com]
>> On Behalf Of Paul K.
>> Sent: Tuesday, September 23, 2008 9:17 AM
>> To: tentec@contesting.com
>> Subject: [TenTec] Ashing for advise please!
>>
>> I have just complected a move to eastern Tennessee from my mountain
top
>> on the raged edge of paradise in Colorado. ?In preparation for the
move
>> I went off the air a bit more than 3 years ago.
>>
>> Upon arrival in Tennessee I quickly figured out the slick real estate
>> agents and their push to sell property with restrictions. ?I found a
>> place with no restrictions, but then had to do the remodeling
routine.
>> (Ya all know how that goes with the misses!) ?So now ?I am ready to
get
>> back on the air with the TT gear. (Omni 6+, Orion, etc.)
>>
>> I have plenty of room for the tower and wires, but also have a couple
>> other projects before I get to the heavy tower stuff. ?I have been
>> looking through QST and on the web at vertical antennas. ?Because of
not
>> wanting to put out ground radials, and the NEED to get back on the
air I
>> have been looking at the GAP, HiGain and MFJ verticals. ?I am open to
>> considering anything else that may be out there.
>>
>> So! ?The question: ?What advise or recommendation do you have for me
on
>> the selection of a no counterpoise vertical I should buy?
>>
>> TNX es 73s
>> de
>> WA0BAG
>> Paul K.
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>> No virus found in this incoming message.
>> Checked by AVG - http://www.avg.com
>> Version: 8.0.169 / Virus Database: 270.7.0/1685 - Release Date:
9/23/2008
>> 7:38 AM
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>>
>>
>>
>> E-mail message checked by Spyware Doctor (5.5.1.322)
>> Database version: 5.10790e
>> http://www.pctools.com/en/spyware-doctor/
>
>
>--
>I am using the free version of SPAMfighter for home users.
>SPAMfighter has removed 586 spam emails to date.
>Paying users do not have this message in their emails.
>Get the free SPAMfighter here: http://www.spamfighter.com/len
>
>
>
>
>
>
>E-mail message checked by Spyware Doctor (5.5.1.322)
>Database version: 5.10790e
>http://www.pctools.com/en/spyware-doctor/
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>
------------------------------
Message: 2
Date: Mon, 29 Sep 2008 12:40:24 -0500
From: Tim Randa <tranda@cox.net>
Subject: [TenTec] Switching speed of a Omni 6 plus
To: TenTec@contesting.com
Message-ID: <48E11308.3080107@cox.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Anyone know the relay switching speed of the 6+? I want to use it with a
non TT amp that is not set up to use the tx in/out jack on the radio.
Is the relay output jack on the radio quick enough to run a qsk amp? I
have the amp switching around 3ms. Has anyone built a interface box that
can be fed with the tx in/out jacks that outputs into a rca jack for the
amp relay?
Just looking for options
Amp is a ALS 600 with the QSK mod
Thanks in advance
de Tim K?FL
------------------------------
Message: 3
Date: Mon, 29 Sep 2008 13:15:26 -0500
From: "CSM\(r\) Gary Huber" <glhuber@msn.com>
Subject: Re: [TenTec] Switching speed of a Omni 6 plus
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Message-ID: <BLU142-DS4FBD2CC1AC121AD3BB7D0A6400@phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"
The TXEN TXOUT jacks are for a keying loop..... think "a series of
contact closures to enable the transceiver to go into transmit". most
likely either the QSK mod will work with the TT keying loop or you can
add a reed relay to pull the amp into transmit.
The relay output jack is just a NO contact that closes when the Omni is
put into transmit by PTT or VOX. It is not designed for QSK switching.
73 & DX
Gary AB9M
http://www.csm-gh.com/AB9M-Shack.htm
--------------------------------------------------
From: "Tim Randa" <tranda@cox.net>
Sent: Monday, September 29, 2008 12:40 PM
To: <TenTec@contesting.com>
Subject: [TenTec] Switching speed of a Omni 6 plus
> Anyone know the relay switching speed of the 6+? I want to use it with
a
> non TT amp that is not set up to use the tx in/out jack on the radio.
> Is the relay output jack on the radio quick enough to run a qsk amp? I
> have the amp switching around 3ms. Has anyone built a interface box
that
> can be fed with the tx in/out jacks that outputs into a rca jack for
the
> amp relay?
>
> Just looking for options
> Amp is a ALS 600 with the QSK mod
>
> Thanks in advance
> de Tim K?FL
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
------------------------------
Message: 4
Date: Sun, 28 Sep 2008 19:13:58 -0400
From: wo8l@aol.com
Subject: [TenTec] Successful Upgrade of Old Jupiter
To: TenTec@contesting.com
Message-ID: <8CAEFD7056C80C8-BD0-8E2@FWM-D35.sysops.aol.com>
Content-Type: text/plain; charset="us-ascii"
Hi,
I finished the upgrade of my 2001 Jupiter today with no problems.? The
PLD change went smoothly and then the new chip from Ten Tec went in
easily.? I found the instructions clear and accurate.
Above a certain S-level, the decoder works well.? The only glitch this
weekend was the RTTY contest, which would have been tough to handle on
CW in any case.
Anyway, I am satisfied very much with the upgrade.?
I am saving money for a new OMNI VII or a used original Orion.? Don't
know which is the better buy, but I'm sure people on this board have an
opinion and I'd be interesting in knowing your views.
Could not make it to the Ten Tec Hamfest this weekend due to lots of
rain here in North Carolina and a tight work schedule.? Next year again,
for sure when I pick up that new OMNI VII.
73s,
Rick
WO8L
------------------------------
Message: 5
Date: Mon, 29 Sep 2008 20:25:33 -0400 (EDT)
From: Henry Mackey <kb9cqo@embarqmail.com>
Subject: Re: [TenTec] Successful Upgrade of Old Jupiter
To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Message-ID:
<819595377.372411222734333117.JavaMail.root@md40.embarq.synacor.com>
Content-Type: text/plain; charset=utf-8
Rick,
Thank you for your report to the group.
Can I take it then that you did not change your green screen for the
blue one? If this is so, would you be so kind as to provide your opinion
as to why you did not?
I am in the process of purchasing both, but am considering on not
replacing the green screen. This is the basis for my question.
73 de Henry/N9HM
N9HM@arrl.net
----- Original Message -----
From: wo8l@aol.com
To: TenTec@contesting.com
Sent: Sunday, September 28, 2008 7:13:58 PM (GMT-0500) America/New_York
Subject: [TenTec] Successful Upgrade of Old Jupiter
------------------------------
Message: 6
Date: Mon, 29 Sep 2008 20:38:48 -0400
From: <n4py@arrl.net>
Subject: Re: [TenTec] Successful Upgrade of Old Jupiter
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Message-ID: <F02D432990A04291BDE7054A1E0A9811@Carl>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
I do not have the new memory chip in my Jupiter. I installed the PLD
update
and then installed version 1.30. It does not have the CW keyboard
feature
or CW decoder in it. I thought I could load 1.30 to get the CW keyboard
and
decoder and lose AM and FM, and then go back to 1.29 if I wanted AM and
FM.
But both versions have AM and FM and no CW keyboard or decoder. Has
anybody
been successful getting the CW decoder and keyboard working without
getting
the new memory chip? What am I missing?
Carl Moreschi N4PY
121 Little Bell Drive
Bell Mountain
Hays, NC 28635
----- Original Message -----
From: <wo8l@aol.com>
To: <TenTec@contesting.com>
Sent: Sunday, September 28, 2008 7:13 PM
Subject: [TenTec] Successful Upgrade of Old Jupiter
> Hi,
>
> I finished the upgrade of my 2001 Jupiter today with no problems.? The
PLD
> change went smoothly and then the new chip from Ten Tec went in
easily.? I
> found the instructions clear and accurate.
>
> Above a certain S-level, the decoder works well.? The only glitch this
> weekend was the RTTY contest, which would have been tough to handle on
CW
> in any case.
>
> Anyway, I am satisfied very much with the upgrade.?
>
> I am saving money for a new OMNI VII or a used original Orion.? Don't
know
> which is the better buy, but I'm sure people on this board have an
opinion
> and I'd be interesting in knowing your views.
>
> Could not make it to the Ten Tec Hamfest this weekend due to lots of
rain
> here in North Carolina and a tight work schedule.? Next year again,
for
> sure when I pick up that new OMNI VII.
>
> 73s,
>
>
> Rick
> WO8L
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
------------------------------
Message: 7
Date: Mon, 29 Sep 2008 16:55:03 -0800
From: "Bill Miner" <wg6h@pacbell.net>
Subject: Re: [TenTec] Ten Tec 40th Keyer Paddels
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Message-ID: <004601c92297$2cc73a70$6401a8c0@Bills>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
I received S/N T 072 today.
As Jim observed, it was well packed and triple boxed for shipping.
The Ten-Tec logo is facing the correct direction as far as I am
concerned
but it is a slightly crooked plastic glue-on part. For the price, I
expected something better.
I have two other bencher paddles that have a smooth crisp feel and I
love
them. After spending a lot of time trying to adjust the new T-T paddle
to
get the same results I find that there is something different. The feel
is
"OK" but I do not love it.
Yes this is very subjective and YMMV.
Bill - K6WLM
----- Original Message -----
From: "Jim WA9YSD" <wa9ysd@yahoo.com>
To: <tentec@contesting.com>
Sent: Saturday, September 13, 2008 7:21 AM
Subject: Re: [TenTec] Key Paddels
> UPS emailed me that it was being shipped. I received the email 2 days
> before I received the package. The package was 8 1/2 by 11 by 3 1/2
> inches. A box was inside. Foam peanuts surrounded it. The inside
box
> had another box on the inside. The paddles were surrounded by a cut
out
> card board so it would not rattle or move around. Foam pads were on
ether
> side of the paddles to prevent further movement. The paddles were
inside
> a plastic bag. Very professional packaging job and handling,
Shipping
> weight of the package was 4 lbs.
>
> Spade and lugs are mounted for cable connections. Just slip them off
> solder wires to them and slip them on. DO NOT have to take the posts
off
> to make connections easy to swap wires.
>
> Ten Tec produced this and shipped this as if I was a VIP, a class act
job.
> Thank you Ten Tec !
>
> Keep The Faith, Jim K9TF/WA9YSD
>
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
------------------------------
Message: 8
Date: Mon, 29 Sep 2008 21:40:43 -0400
From: "John T. Fleming" <W3GQJ@embarqmail.com>
Subject: Re: [TenTec] Successful Upgrade of Old Jupiter
To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Message-ID: <5B9A783F690E451BA4A1B956253FDC14@Core2BigToy>
Content-Type: text/plain; charset="US-ASCII"
Carl,
I am another person who had a problem loading the new RUF file. It
loaded
in about 23 seconds, but then the program never ran to do the balance of
the
work. The-Tec is sending me the "GO" chip to temporarily install to
update
the radio and then I can replace it with the new chip I bought from
them. I
notice in the directory 538v1300.ruf and 538cwv1010.ruf. I could not
find
anywhere what they are for except possibly doing what you are trying to
do.
The 538kbd.ruf is about twice the size of the other two files. Do you
or
anyone know what the 2 other RUF files are for? Thanks.
73,
John
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com]
On Behalf Of n4py@arrl.net
Sent: Monday, September 29, 2008 8:39 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Successful Upgrade of Old Jupiter
I do not have the new memory chip in my Jupiter. I installed the PLD
update
and then installed version 1.30. It does not have the CW keyboard
feature
or CW decoder in it. I thought I could load 1.30 to get the CW keyboard
and
decoder and lose AM and FM, and then go back to 1.29 if I wanted AM and
FM.
But both versions have AM and FM and no CW keyboard or decoder. Has
anybody
been successful getting the CW decoder and keyboard working without
getting
the new memory chip? What am I missing?
Carl Moreschi N4PY
121 Little Bell Drive
Bell Mountain
Hays, NC 28635
----- Original Message -----
From: <wo8l@aol.com>
To: <TenTec@contesting.com>
Sent: Sunday, September 28, 2008 7:13 PM
Subject: [TenTec] Successful Upgrade of Old Jupiter
> Hi,
>
> I finished the upgrade of my 2001 Jupiter today with no problems.? The
PLD
> change went smoothly and then the new chip from Ten Tec went in
easily.? I
> found the instructions clear and accurate.
>
> Above a certain S-level, the decoder works well.? The only glitch this
> weekend was the RTTY contest, which would have been tough to handle on
CW
> in any case.
>
> Anyway, I am satisfied very much with the upgrade.?
>
> I am saving money for a new OMNI VII or a used original Orion.? Don't
know
> which is the better buy, but I'm sure people on this board have an
opinion
> and I'd be interesting in knowing your views.
>
> Could not make it to the Ten Tec Hamfest this weekend due to lots of
rain
> here in North Carolina and a tight work schedule.? Next year again,
for
> sure when I pick up that new OMNI VII.
>
> 73s,
>
>
> Rick
> WO8L
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
------------------------------
Message: 9
Date: Mon, 29 Sep 2008 21:48:56 -0400
From: <n4py@arrl.net>
Subject: Re: [TenTec] Successful Upgrade of Old Jupiter
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Message-ID: <EA8790CB4B0F49B1868B8D3C23D89991@Carl>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
The 538v1300.ruf file is for Jupiters that have the extra memory and it
has
both personalities in it. The 538cwv1010.ruf file is the CW personality
for
Jupiters that have the old memory chip like mine. But the update
program
will not load 538cwv1010.ruf in my Jupiter for some unknown reason.
Carl Moreschi N4PY
121 Little Bell Drive
Bell Mountain
Hays, NC 28635
----- Original Message -----
From: "John T. Fleming" <W3GQJ@embarqmail.com>
To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Sent: Monday, September 29, 2008 9:40 PM
Subject: Re: [TenTec] Successful Upgrade of Old Jupiter
> Carl,
>
> I am another person who had a problem loading the new RUF file. It
loaded
> in about 23 seconds, but then the program never ran to do the balance
of
> the
> work. The-Tec is sending me the "GO" chip to temporarily install to
> update
> the radio and then I can replace it with the new chip I bought from
them.
> I
> notice in the directory 538v1300.ruf and 538cwv1010.ruf. I could not
find
> anywhere what they are for except possibly doing what you are trying
to
> do.
> The 538kbd.ruf is about twice the size of the other two files. Do you
or
> anyone know what the 2 other RUF files are for? Thanks.
>
> 73,
> John
>
> -----Original Message-----
> From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com]
> On Behalf Of n4py@arrl.net
> Sent: Monday, September 29, 2008 8:39 PM
> To: Discussion of Ten-Tec Equipment
> Subject: Re: [TenTec] Successful Upgrade of Old Jupiter
>
> I do not have the new memory chip in my Jupiter. I installed the PLD
> update
>
> and then installed version 1.30. It does not have the CW keyboard
feature
> or CW decoder in it. I thought I could load 1.30 to get the CW
keyboard
> and
>
> decoder and lose AM and FM, and then go back to 1.29 if I wanted AM
and
> FM.
> But both versions have AM and FM and no CW keyboard or decoder. Has
> anybody
>
> been successful getting the CW decoder and keyboard working without
> getting
> the new memory chip? What am I missing?
>
> Carl Moreschi N4PY
> 121 Little Bell Drive
> Bell Mountain
> Hays, NC 28635
> ----- Original Message -----
> From: <wo8l@aol.com>
> To: <TenTec@contesting.com>
> Sent: Sunday, September 28, 2008 7:13 PM
> Subject: [TenTec] Successful Upgrade of Old Jupiter
>
>
>> Hi,
>>
>> I finished the upgrade of my 2001 Jupiter today with no problems.?
The
>> PLD
>
>> change went smoothly and then the new chip from Ten Tec went in
easily.?
>> I
>
>> found the instructions clear and accurate.
>>
>> Above a certain S-level, the decoder works well.? The only glitch
this
>> weekend was the RTTY contest, which would have been tough to handle
on CW
>> in any case.
>>
>> Anyway, I am satisfied very much with the upgrade.?
>>
>> I am saving money for a new OMNI VII or a used original Orion.? Don't
>> know
>
>> which is the better buy, but I'm sure people on this board have an
>> opinion
>
>> and I'd be interesting in knowing your views.
>>
>> Could not make it to the Ten Tec Hamfest this weekend due to lots of
rain
>> here in North Carolina and a tight work schedule.? Next year again,
for
>> sure when I pick up that new OMNI VII.
>>
>> 73s,
>>
>>
>> Rick
>> WO8L
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
------------------------------
Message: 10
Date: Mon, 29 Sep 2008 22:50:14 -0400
From: "jmalloy" <jmalloy@stny.rr.com>
Subject: [TenTec] Orion (original) For Sale
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Message-ID: <12788E826DF44C9F9987DCAB32613039@mozart>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
For Sale: Orion (the original version) with antenna tuner (the LDG
internal
Orion tuner) and 705 microphone. This rig has the modifications
suggested by
Ten-Tec for the band scope (done by me). Rig is a 9.5 out of 10 and
comes
with the Ten-Tec additional parts bag and manual. All this can be yours
for
the amazing low price of $2300 plus shipping!
I'm letting it go due to financial exigencies. Currently in use; if
you'd
like to hear it on the air, let me know and we can arrange a sked if the
aether allows.
73,
Joe, W2RBA
------------------------------
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
End of TenTec Digest, Vol 69, Issue 30
**************************************
----------Legal Disclaimer----------
The information contained in this message may be privileged and
confidential, and is intended solely for the use of the named addressee.
No other person is authorized to access, copy or re-use this message (or
any information contained herein). If you are not the intended
recipient, please notify us immediately by replying to this message and
delete it from your computer.
------------------------------
Message: 3
Date: Tue, 30 Sep 2008 15:38:00 -0700
From: Fernando Quinones <n2fq@sbcglobal.net>
Subject: Re: [TenTec] Omni VII Rack Mount
To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Message-ID: <85CF6C40-07D1-4007-9003-3A3548E8F2D9@sbcglobal.net>
Content-Type: text/plain; charset=US-ASCII; format=flowed
Never mind.
TT says the holes and color don't match.
sri for the bw.
On Sep 30, 2008, at 10:58 AM, Fernando Quinones wrote:
> Hello.
>
> Anyone know if the Rack Mount Kit for the Omni will work with
>
> the Jupiter?
>
> I see from the specs that:
>
> (HxWxD) Omni Vll is (5.0x12.0x14.75)
> Jupiter is (5.0x12.125x13)
>
>
> tnx.
>
> Fernando N2FQ
>
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
Fernando N2FQ
<http://pages.sbcglobal.net/n2fq>
------------------------------
Message: 4
Date: Tue, 30 Sep 2008 19:06:42 -0500
From: Dave <dbp@tds.net>
Subject: [TenTec] Ten Tec Argonaut V for sale
To: Tentec reflector <tentec@contesting.com>
Message-ID: <20080930190642.I3CHC.1503689.root@webfep12>
Content-Type: text/plain; charset=utf-8
Ten Tec Argonaut V HF all mode rig with accessory hand mic, fan kit,
DIN (dongle) cable, DC power cord, and manual. Like new, non smoking
environment, not a scratch. Email for pictures. $650 shipped CONUS.
Reply off line at k1opq@arrl.net
------------------------------
Message: 5
Date: Tue, 30 Sep 2008 21:01:56 -0400
From: <n4py@arrl.net>
Subject: Re: [TenTec] RIT/XIT problem solved!!!!!!!!!!!
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Message-ID: <5C6034877C624AEAACB8D5EF97D756E3@Carl>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
John,
It's been a little while now. Are you still sure you have fixed your
RIT
problem?
73,
Carl Moreschi N4PY
121 Little Bell Drive
Bell Mountain
Hays, NC 28635
----- Original Message -----
From: "John T. Fleming" <W3GQJ@embarqmail.com>
To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Sent: Monday, July 14, 2008 5:49 PM
Subject: [TenTec] RIT/XIT problem solved!!!!!!!!!!!
>I took my Orion apart again today. My first experience with the
problem
>was
> in September, 2004. Many times I had soldered the encoder pins
thinking
> it
> fixed the problem. A year later it would come back and be temperature
> sensitive. Solder pins again and problem would quit. About three
months
> ago I had the problem again and soldered pins. A week later it was
back.
> So in frustration, I decided to master this challenge.
>
>
>
> I removed the logic and display board today. Before I removed it, I
> gently
> pulled on the logic board and could make the problem appear. I then
> pushed
> on the board and the problem disappeared.
>
>
>
> After I removed the board and carefully looked at the pins, pins 3 and
4
> of
> J8 did not have any scratch insertion marks on them. I looked closer
> under
> a magnifying glass on noticed that pins 3 and 4 were slightly out of
> alignment. They were bent about 1/32 toward the display screen. I
took a
> picture with digital camera and the misalignment is visible. (I am
> sending
> a copy to Ten-Tec for their files.) Using my finger nail, I bent pins
3
> and
> 4 away from the display until they lined up with the other pins. I
then
> remounted the logic board / display board and then tried flexing the
logic
> board again. This time I had no problem. Evidently the female
connector
> sockets only have contacts on one side because of small size.
>
>
>
> If the RIT/XIT quits before I "check out," I will let the list know.
But
> I
> plan to try to reach the nineties which means I will probably have a
> different rig by then! :=}
>
>
>
> Thank you everyone who sent me their observation and John, K1ESE, who
> worked
> on his rig this weekend and confirmed that the problem was in the area
of
> the "B" ribbon cable.
>
>
>
> 73,
>
> John
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
------------------------------
Message: 6
Date: Tue, 30 Sep 2008 23:08:40 -0400
From: "Ken Scheper" <kenshep@one.net>
Subject: Re: [TenTec] Successful Upgrade of Old Jupiter
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Message-ID: <001f01c92373$0178e080$0a00a8c0@SHEP>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
Can someone give ALL of us Jupiter owners a ...1,2,3...process. All of
this
PLD file stuff, etc.. doesn't get it.
I'd like a definite procedure list from Ten-Tec on how it works, and
needs
to be done. I'm hearing horror stories about blank screens, etc...
Too
many variables for me to be comfortable with.
Do I need to download direct? If so, how? Give me a procedure list.
(e.g.plug A into B, do this or that, hit this button, etc...) Let's make
it
user friendly, not a darn puzzle.
Lets dumb it down a bit for us non-computer techies.... I will take the
step, but only when I know I won't screw my radio up. I've just
recovered
from an IE8 debacle....FYI... don't load the 8 Beta! Some sites want
it,
but the normal sites don't, and won't support it. What a mess!
73
Ken
Ken Scheper
President
KS Consulting, Ltd.
Tel. 513-490-1633
Fax 513-598-6887
ksconsultingLtd.com
----- Original Message -----
From: <wo8l@aol.com>
To: <TenTec@contesting.com>
Sent: Sunday, September 28, 2008 19:13
Subject: [TenTec] Successful Upgrade of Old Jupiter
> Hi,
>
> I finished the upgrade of my 2001 Jupiter today with no problems.? The
PLD
> change went smoothly and then the new chip from Ten Tec went in
easily.? I
> found the instructions clear and accurate.
>
> Above a certain S-level, the decoder works well.? The only glitch this
> weekend was the RTTY contest, which would have been tough to handle on
CW
> in any case.
>
> Anyway, I am satisfied very much with the upgrade.?
>
> I am saving money for a new OMNI VII or a used original Orion.? Don't
know
> which is the better buy, but I'm sure people on this board have an
opinion
> and I'd be interesting in knowing your views.
>
> Could not make it to the Ten Tec Hamfest this weekend due to lots of
rain
> here in North Carolina and a tight work schedule.? Next year again,
for
> sure when I pick up that new OMNI VII.
>
> 73s,
>
>
> Rick
> WO8L
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
------------------------------
Message: 7
Date: Wed, 01 Oct 2008 11:06:08 -0400
From: Ten-Tec Amateur Radio Sales <sales@tentec.com>
Subject: [TenTec] Ten-Tec used/demo list October 1, 2008
To: Discussion of Ten-Tec Equipment <tentec@contesting.com>,
sales@tentec.com
Message-ID: <48E391E0.3060700@tentec.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Current as of October 1, 2008
The following is available as used equipment direct
from Ten-Tec. 30 day warranty, 10 day trial period, shipping
is additional. Exception: used linears warrantied 30 days
except for final tubes which carry no warranty. Used items
often sell quickly. Please make sure we have the item in stock
before sending payment. (800) 833-7373 8-5:30 Eastern M-F.
Ten-Tec takes trade-ins direct of modern used Ten-Tec gear on our used,
demo and new equipment.
We are now also able to take trade-ins of Icom, Kenwood, and Yaesu
transceivers on Ten-Tec equipment via an agreement we have with The Ham
Station of Evansville, IN. Contact us via email at sales@tentec.com or
(800) 833-7373 or The Ham Station at (800) 729-4373 or
sales@hamstation.com for additional details.
Transceivers, supplied with DC power cord and manual:
516TCXO Argonaut V + TCXO + fan installed $740
538AT Jupiter $1350 original case color, green screen
563/OPT1 Omni-VI with Omni-VI+ DSP chips installed $1270
563/OPT3 Omni-VI factory upgraded to Omni-VI Plus $1395
564 Omni-VI Plus $1695
565 Orion, no autotuner $2400
565AT Orion with autotuner $2700
566AT Orion II with autotuner $3695
Other items:
961 PS/spkr console Omni's, Paragon's $175
963 25 amp switching PS $115
The following equipment is available as demo gear and
carries a 1 year parts and labor warranty, 30 day trial
period. What is a 'demo unit'? Demos are units that have
been evaluated in one of the following manners: at the
factory or hamfests for display purposes, loaned out for
evaluation by commercial customers, or returns on our
30 day risk-free sales policy. Shipping is additional.
RX-320D PC Radio $323.10
308A gold heat sink fan kit for Argonaut V $13.50
310 fan kit $35.96
538AT Jupiter with autotuner, new style black case/blue screen $1705.50
566 Orion II, no tuner $3865.50
588 Omni-VII, no tuner $2425.50
588AT Omni-VII with autotuner $2695.50
708 deluxe desk mic, 4 pin conn $89.10
708A deluxe desk mic, 8 pin conn $89.10
709A desk mic, 8 pin conn $62.10
711 table stand for 709/709A $13.50
6000 Vector Network Analyzer $589.50
Stan Brock, WD?BGS
Amateur Radio Sales
------------------------------
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
End of TenTec Digest, Vol 70, Issue 1
*************************************
----------Legal Disclaimer----------
The information contained in this message may be privileged and confidential,
and is intended solely for the use of the named addressee. No other person is
authorized to access, copy or re-use this message (or any information contained
herein). If you are not the intended recipient, please notify us immediately
by replying to this message and delete it from your computer.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|