Dan have you tried the receive antenna switch on the rear of the rig? I no
longer have my Omni V but I think turning the switch on and off a few times may
resolve your problem.
73,
Rick
VE7TK
------------
Subject: [TenTec] OMNI V goes dead on receive until...
From: OTAKEBI@aol.com
Date: Tue, 2 Sep 2008 01:20:33 EDT
My OMNI V is having a problem.
I turn it on and no receive on any band.
I do get full RF output on all bands and the rig switches from transmit to
receive and back but no audio.
However, if I flip rig on and off a couple of times all is normal on receive
on all bands.
If I turn it off after a few minutes and turn it back on no receive again.
A couple of on and offs and it works again.
When dead I hear very weak signals and s meter shows 20 db down.
Seems like a relay or a bad connection maybe to the IF/AF board.
Any of you guys had this problem?
Thanks in advance.
Dan/N4VET
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|