On Thu, 3 Jul 2008 11:21:00 -0500, Speer, Doug wrote:
>I own two of the old original Hercules 444 Ten-Tec amplifiers
You need to find a "pre-delay" keying output from the Orion. This
corresponds to the keying line in the older Ten Tec rigs with which
the 444 was designed to work. I don't know if the Orion has this,
but I'd be surprised if it doesn't. The K2, K3, the FT1000-series
radios, and the TS850 all do. The Omni V has it, but you have to go
inside the radio and get it (from a terminal strip on one of the
boards).
And you need to feed the RX antenna output from the 444 to the
Orion's RX antenna input.
73,
Jim K9YC
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|