TenTec
[Top] [All Lists]

Re: [TenTec] Coax Connectors

To: Tentec list <tentec@contesting.com>
Subject: Re: [TenTec] Coax Connectors
From: Marinus Loewensteijn <zl2ml@hotmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 31 May 2008 18:16:56 +0800
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Ken

thanks for the feedback. I have got locally a dealer in obscure electronic 
goods who has several thousands of N connectors from "cheap" nickel plated 
through to silver and stainless.

He also has assemblies with RG316D, RG142 which look pretty nice and can handle 
all the power I may ever throw at it.

One thing I have learned is that the "UHF" / PL259 connectors are not weather 
proof and in my hands I seem to get bad connections sooner or later with them.

I am also looking at some of this guys TNC range, not a big selection but good 
enough to get by with.

Wonder what you think of the TNC, seem to be used a lot in the labs, together 
with BNC and N.

PS - at the moment I am only running HF, little interest in anything higher but 
then a lot has changed in the last 20 years and who knows what we are doing in 
20 years time?

I am running around 75 Watts but I like to configure that I am able to handle 
up to approx 300 - 375 Watts (max 30 Mhz).

Many thanks in advance

Marinus, ZL2ML





Hi Marinus,

The male "UHF" connector is a PL-259 and the female is SO-239. At MF and
HF they are fine if they are quality versions and are installed
correctly and kept clean and dry. You see a lot of terminations (dummy
loads) with "N" connectors, because many of them are rated for much
higher frequencies than SO-235/PL-259 are very good for. They are
typically used as the load for reverse power on a circulator between a
transmitter and a filter cavity in a UHF or VHF transmitting system.
Professionals stay away from PL-259/SO-239 connectors. Good connectors
(BNC, N and others) are usually three or four times more expensive than
"UHF" connectors. If you are staying with smaller cable such as RG-58
and RG-59, BNC is a good choice. If you stay to power levels that can be
handled by RG-58, then BNC connectors will also handle it.

DE N6KB


_________________________________________________________________
Free Windows Live software. Chat, search, share pics and more
http://get.live.com/
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>