Gee atr I am impressed I did not know you were so technical John
----- Original Message -----
From: "Arthur Trampler" <atrampler@att.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Tuesday, March 04, 2008 11:04 AM
Subject: [TenTec] Omni VI NB Mod
Hey All,
Over the weekend I replaced the two, 22K resistors on the NB board with 16K
as recommended by some to be able to turn off the NB on my Option 3. I was
suffering from the "klix" effect, where it seemed so many stations I
listened to, if they were at S9 + 10 or better, had bad klix.
I now have what sound like IMD artificats coming "out the wazoo." There
seems to be some abatement, at times, if I actually increase the N.B. level
a bit.
Received CW signals are distorted and I am often picking hearing what sound
like IMD-generated signals, even with no strong signals on the band.
Kicking on the 9mhz filters (which turns on the roofing filter) does kill
these.
Has anybody else had an experience like this?
I was brain-dead and did not take a picture of the board before taking it
out, figuring I would have labels on the various connectors to put them back
in. I noticed one difference in my board compared to the picture in the
manual. In the upper right there are two jacks to receive an RF connector.
I'm thinking one was labeled perhaps 34. In the manual, there is only one
jack. I used the jack shown in the manual--could this be the problem? I
also did not see the single RF connector that runs toward the front of the
transceiver labeled, but assumed it was to go in the jack on the left side
of the board. If someone thinks I goofed there, let me know.
Finally, I could not find 1/8 watt resistors that were 16K, so I used 5%,
1/2 watt. Could the larger size/fact that they are not flush on the board
be playing into this? I tightened the board down pretty strongly, so I
don't think that's the problem.
Any direction is appreciated.
Thanks!
Art, KØRO
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|