First, try the various resets beginning with a master reset.
73, Duane. AC5AA
Sent from my iPod
Duane C.
On Mar 2, 2008, at 10:08 AM, "Bill Axelrod" <bill@axelrods.org> wrote:
> Help please.
>
> I have a brand new (one month old) Orion II which was working
> fine until this morning. When I came down and turned the rig on it
> looked fine. But I can not hear any signals on any band with the
> main receiver. And when I try to transmit I get no power out at all.
>
> The transceiver keys, I hear the side tone, but it does not
> deliver any power. Same when I hit the tune button.
>
> Same problem with either vfo. And same problem with antenna 1
> or 2. The sub receiver seems to work OK. The transmitter is NOT
> disabled in the TX menu.
>
> Any thoughts on what I should look for or at? Is there a button
> or switch I may have inadvertently thrown?
>
> I have disconnected all the ancillary equipment and have a dummy
> load connected directly to the antenna 1 connector.
>
> Thanks and 73... Bill K3WA
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> Yahoo! Groups Links
>
> <*> To visit your group on the web, go to:
> http://groups.yahoo.com/group/orion565/
>
> <*> Your email settings:
> Individual Email | Traditional
>
> <*> To change settings online go to:
> http://groups.yahoo.com/group/orion565/join
> (Yahoo! ID required)
>
> <*> To change settings via email:
> mailto:orion565-digest@yahoogroups.com
> mailto:orion565-fullfeatured@yahoogroups.com
>
> <*> To unsubscribe from this group, send an email to:
> orion565-unsubscribe@yahoogroups.com
>
> <*> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|