Astatic 10D or D-104 is what I used on my 509.
Paul Gates, KD3JF
"Geoffrey S. Mendelson" <gsm@mendelson.com> wrote: On Tue, Nov 27, 2007 at
09:22:14AM -0500, nf7v@cox.net wrote:
> Hello all,
> I have just aquired an Argonaut 509 and I need a mic for it.
> What recomendations do some of you have, and is something with an equalizer
> going to get through a bit better then a standard mic?
Almost anything that will work with a high impedance rig will do. I've
used a 10-DA, D104, tentec dynamic mic, and an old radio shack CD
dynamic mike with good results.
Note the wiring carefully, it's a stereo 1/4" headphone plug
with one wire ground, one audio and one PTT.
Geoff.
--
Geoffrey S. Mendelson, Jerusalem, Israel gsm@mendelson.com N3OWJ/4X1GM
IL Voice: (07)-7424-1667 U.S. Voice: 1-215-821-1838
Visit my 'blog at http://geoffstechno.livejournal.com/
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
---------------------------------
Never miss a thing. Make Yahoo your homepage.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|