Gee whiz, ah no nuttin about them first 7 things. What they used fer ?
I do set the last one though. It ususlly is between 3 and 7 , it don't seem
to work very well though.
I find I have to push the AF control to get to the RF adjustment and set it
around 95 to 98 to get rid of the HISSY snake in the box.
Other than that it seems to work pretty durn well ................. ON CW!
Walt K8CV Royal Oak, MI.
----- Original Message -----
From: "Bob McGraw - K4TAX" <RMcGraw@Blomand.net>
To: <tentec@contesting.com>
Sent: Friday, November 16, 2007 9:20 AM
Subject: [TenTec] Omni VII Configuration Question
> To those that have a Omni VII, I'd like to know what values you are using
> for the following parameters:
>
> I use the 708A mike. My numbers are shown in { } Some of these number
> will be influenced by the adjustment of the internal "hardware mike level"
> control setting.
>
> SP level % {30%} speech processor
> VOX Trip level % {85%}
> ANTI-VOX % {10%}
> VOX HANG % {5%}
> MIC level % {25%}
> TX ROLL-OFF {150Hz}
> AN level {off} auto notch
> NR level {off} noise reduction
>
> I find these to be quite good numbers. The radio is a great performer and
> I get excellent audio reports on transmit.
>
> Reply off list if you wish.
>
> 73
> Bob, K4TAX
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|