Unlikely. Do you have a Ten Tec PS? If not, I'd get one. When the rig draws
too much current, it just shuts everything off. I think there are circuit
breakers for "non TT" power supplies also. But it you can, find a Ten Tec PS
for your rig and you shouldn't have to worry about small blunders like this.
I think a 961 matches your rig but maybe it's the 960. Put the rig back on a
watt meter and you'll more then likely see no damage.
Mike
----- Original Message -----
From: "john ferro" <foxbat426@hotmail.com>
To: <tentec@contesting.com>
Sent: Saturday, September 22, 2007 00:00
Subject: [TenTec] high swr for short time - can it do damage?
hi ten tec gurus! hope all is well - quick question - i forgot that my radio
(Ten Tec paragon)was tuned to 17 meters and for a split second talked into
the mic at full power (100 w)on 20 meters - the swr went to about 5 or 6:1
for a click of a mic second or two - this is the second time i did this
(stupidity) - wondering if this can do damage? - obviously its not good. the
radio seems to be fine and didn't seem to have any problems with this short
burst - but just wondering if this short duration high swr could do damage?
by the way how high an swr is acceptable - just wondering? thx, john
_________________________________________________________________
Kick back and relax with hot games and cool activities at the Messenger
Café.
http://www.cafemessenger.com?ocid=TXT_TAGLM_SeptWLtagline
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|