TenTec
[Top] [All Lists]

Re: [TenTec] Omni VII, Antenna tuning, etc.

To: waltk8cv4612amos@att.net,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Omni VII, Antenna tuning, etc.
From: John Huggins <john@johnhuggins.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 10 Sep 2007 09:43:35 -0400
List-post: <mailto:tentec@contesting.com>
An excellent point and as an Electrical Engineer who designs lightning 
protection systems music to my ears.

Network remote operation means different things for different folks so 
let me clarify my goals.

My networking desires are only to communicate with my (future) Omni VII 
inside my home network.  Communicating with the radio from the outside 
might be something interesting to do, but is not a requirement and would 
never be just "put the Omni on the Internet and hope it is secure 
enough."  This requires secure tunneling or a VPN system to do correctly 
as one should never expect a peripheral like a printer or this radio to 
provide the adequate level of security easily attained from purpose 
built secure network equipment.

I know I know you are probably thinking "John, if you want to use your 
radio and you are at home why don't you just go sit in front of it?"  A 
completely valid point and I do intend to do this often with one hand on 
the knobs and the other on the PTT or Key.  In addition, however, I am 
really interested in using my radio/antenna assets from my laptop 
anywhere in my house and, perhaps, while relaxing on the deck; I have 
many personal reasons for pursuing this.

If the Omni VII is what I think it is, TenTec has provided a way to have 
my cake and eat it to.

Because I do not intend to operate from outside my home network, I would 
still manually power up and down the radio station, connect/disconnect 
antennas, etc. just like I always do.  While I still intend to install 
some great lightning and surge protection equipment, my station will 
still benefit from the good ol' Arm-strong manual disconnect "feature."

John



waltk8cv4612amos@att.net wrote:

>Just a thought, you know, sometimes one wonders ? What / how, does the 
>remote station protect ITSELF from lightening? Does it stay on all the time? 
>I know repeaters do so do they just EAT the damage or is there some 
>protection or maybe a telephone total disconnect command ? I can't be the 
>first person to think about this can I ? :-))))
>
>Walt K8CV Royal Oak, MI.
>
>----- Original Message ----- 
>From: "Paul Gates, KD3JF" <pearly732003@yahoo.com>
>To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
>Sent: Monday, September 10, 2007 7:36 AM
>Subject: Re: [TenTec] Omni VII, Antenna tuning, etc.
>
>
>  
>
>>For what it is worth... I am usually concerned about the cost of things. 
>>If I have to pay $300.00 for a tuner I am going to get one good for 3KW.
>>
>>Ernie Piche N1SW <n1sw@cox.net> wrote: John Huggins wrote:
>>    
>>
>>>Ladies and Gentlemen,
>>>
>>>Say I obtain the Omni VII radio and make good use of its Ethernet
>>>control with OMNIVIIOnePlug program (and let's assume this works).
>>>
>>>For total automation of the station, should I rely on the internal
>>>antenna matcher or offload this task to an external automatic matcher?
>>>
>>>In other words, should the extra $300 be spent on the internal matcher
>>>or applied to other, perhaps more appropriate, matching gear?
>>>
>>>There are a lot of correct ways to to this of course, but the opinions
>>>of those with experience are helpful.
>>>
>>>Thanks for any input.
>>>
>>>John
>>>KX4O
>>>_______________________________________________
>>>TenTec mailing list
>>>TenTec@contesting.com
>>>http://lists.contesting.com/mailman/listinfo/tentec
>>>
>>>
>>>      
>>>
>>Seems to me that if your are going to add an external  tuner then you
>>will have to have a way to tune it remotely.  With the built in tuner
>>the access will be through the One Plug GUI or if your antennas are well
>>matched you won't need a tuner anyway.  Yes the remote operation does
>>work I have been running my rig from my laptop, although only from
>>within my own house, I think they would frown on me working DX from
>>work.  Hi Hi!
>>
>>Ernie
>>N1SW
>>
>>_______________________________________________
>>TenTec mailing list
>>TenTec@contesting.com
>>http://lists.contesting.com/mailman/listinfo/tentec
>>
>>_______________________________________________
>>TenTec mailing list
>>TenTec@contesting.com
>>http://lists.contesting.com/mailman/listinfo/tentec 
>>    
>>
>
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>
>  
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>