The Paragon II should not suffer from PLL problems. Ten Tec redesigned
the PLL boards. The main PLL problem with the Paragon was poor soldering
on the PLL boards. This can be fixed by reflowing the solder on the 2
PLL boards.
73,
Bob WB2VUF
Alan Sewell wrote:
> Some of the differences between the Paragon and Paragon II are at
> http://tinyurl.com/2jmgro .
>
> 73,
>
> Alan N5NA
>
> http://www.tentecwiki.org
>
>
>
> john ferro wrote:
>> what are the differences between these radios? i am actaully looking to try
>> a paragon out - any advantages in spending the extra money and getting a
>> paragon II? also what are the PLL problems associated with the paragon - is
>> easily fixed - does the paragon II suffer from these pll problems? - is it
>> better to purchase a late model (high serial number) paragon vs. an earlier
>> model (low serial number) and if so what is the serial number cutoff? tia,
>> john
>>
>>
>>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|