Thanks to all who replied. Its quite apparent that I've not been spending
enough time with my old friend, my Corsair II which was used to to put more
than 100 DXCC countries in my log. I'm preparing for Field Day (W9AML) and
my Corsair II will be used primarily for PSK-31 and CW.
See you in the pile-ups.
Best regards,
Gary - AB9M
CSM(r) G.L.Huber
9679 Heron Bay Road
Bloomington, Illinois 61704
(309)662-0604
www.csm-gh.com
csm-gh@www.csm-gh.com
gary.huber@us.army.mil
ab9m@arrl.net
www.csm-gh.com/mytrike.htm
www.csm-gh.com/75thRepoDepo.htm
----- Original Message -----
From: "GARY HUBER" <glhuber@msn.com>
To: "TenTec Reflector" <tentec@contesting.com>
Sent: Wednesday, June 06, 2007 7:57 AM
Subject: [TenTec] Corsair II - No S-Meter Reading?
> I have a Corsair II which has developed a no S-Meter reading (meter needle
> stays on "0") when the meter switch is Ic position during receive. When
> the meter switch is in the SWR, FWD, or Process positions normal S-Meter
> readings are indicated during receive. All other meter functions including
> Ic during transmit are normal.
>
> Any ideas on the problem, failed component, remediation? Thanks!
>
> Best regards,
> Gary - AB9M
> CSM(r) G.L.Huber
> 9679 Heron Bay Road
> Bloomington, Illinois 61704
> (309)662-0604
> www.csm-gh.com<http://www.csm-gh.com/>
> csm-gh@www.csm-gh.com<mailto:csm-gh@www.csm-gh.com>
> gary.huber@us.army.mil<mailto:gary.huber@us.army.mil>
> ab9m@arrl.net<mailto:ab9m@arrl.net>
> www.csm-gh.com/mytrike.htm<http://www.csm-gh.com/mytrike.htm>
> www.csm-gh.com/75thRepoDepo.htm<http://www.csm-gh.com/75thRepoDepo.htm>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|