The manual is incorrect and needs updated.
Press the "0" digit to force yourself into flash update mode.
FYI:
MNU does force the master reset.
"1" forces you into radio mode.
"2" forces you into remote control mode.
73, d3 KI4JPL in TN
John
On 5/24/07, dbp@tds.net <dbp@tds.net> wrote:
Hi-
OMNI VII
Upgrading software-
The manual says on page 33 to "Turn the transceiver while holding down the MNU button"
in order to get into the "Flash Update Mode". ( bottom right column of page 33). In the
top right hand column of the same page it gives the same instruction for a Master reset.
MNU works at power ON for a Master Reset. What key is pressed at on for Flash
Update Mode?
73 de Dave in NH
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|