Hi Gang,
Just wanted to pass this tip about USB/Serial adapters, the Jupiter and
computers that have only USB ports.
I had a difficult time trying to hook up the Jup with my new Dell (Dimension
E521) because the new computer/s
now having only USB ports. The reading of the archives helped a great deal
in solving this problem.
Also they put me in contact with folks who were very helpful. I only wanted
to download the upgrades from
TT and by using a Radio Shack P/N 26-183 cable adapter I was successful. One
of the problems was the finding
of the "ports/lpt" under device manager. The "ports/LPT" only appears when
the actual USB/Serial adapter in is plugged
in. So if you're trying to change com ports you must load the drivers first
and then have the adapter plugged in to
see "ports/LPT" under device manager.
I'm not a computer wiz so it gave me as well as Dell supports a problem. I'm
grateful to all that helped from
this reflector and especially Larry WB4WSA. Thank you.
Kevin KA2NUE
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|