TenTec
[Top] [All Lists]

Re: [TenTec] serious filter problem with Orion II

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] serious filter problem with Orion II
From: "Pfizenmayer" <pfizenmayer@worldnet.att.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 27 Jan 2007 10:35:48 -0700
List-post: <mailto:tentec@contesting.com>
Try checking where you have the taps set under FILTER . I find that at other 
than even spacings of 20 - the DSP will start oscillating at narrow 
bandwidths when you vary the  BW. It seems ok at taps set for 199  and you 
can figure out which absolute numbers are usable after the contest.

 To summarize:ON my OII - I know others can see this but at different 
absolute tap numbers - but still spaced by 20.

1. You have to go down to tap 32 and then increase tap numbers from there to
get the sequence of numbers 32,37,42,47 ,52 etc etc. Once you have gone to
32 and start up , you can go up or down and repeat the same sequence of
numbers.

2. At tap positions 47,67,87,107,127,147,167, 187 I could not get any hollow
sounding artifacts or different hisses from the DSP filter no matter how
much I tweaked BW. It also appears anything between 187 and 199 is OK - at
least I did not get any glitches in my tweaking.I got a few times what
sounded like internally generated rough modulated carriers every few khz but
was not able to repeat this well enough to document them.

3. Any other tap position will glitch if you go down to 100 hz BW then up to
500 and back down  and  sometimes it builds up slowly.

4.Tap positions below about 122 seem to be more easily glitched than those
above 122.

 FWIW __ Hank K7HP


>
> Already in the beginning of the contest OII developed a following problem: 
> Whenever I play around with BW control and go narrower than ca 200hz 
> filters seem to completely mess up and I start to here the band extremely 
> wide, getting tens of signals and strange noises like hash and cracks on 
> top of that. Basically as if I was hearing the whole band. I have to do 
> restart to get rid of this. This has happened a few times already not even 
> changing the BW but working at ca 300hz. IT comes like a wave taking about 
> 5 sec maybe for the filters to completely lose themselves. I have had to 
> do ca 10 restarts and I try to avoid going narrower or BW at all.
>


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>