Wonder if you are dividing by 10 or instead dividing by 5 followed by
dividing by 2, if that's possible.
Happy New Year,
Mike N4NT
----- Original Message -----
From: "Mike Bryce" <prosolar@sssnet.com>
To: "Discussion of Ten-Tec Equipment" <TenTec@contesting.com>
Sent: Thursday, December 28, 2006 6:44 PM
Subject: [TenTec] calibrator question...argosy I
Hola...
It's gray, muddy and out and out nasty outside.. great time to play
with some older ten tec radios.
I've been playing with a simple 1 mhz oscillator that is divided by
ten to produce 100 khz signal.
works great! lots of square waves coming out of the divider. the
output is right on the money 100khz..
now, the question...
hooked this oscillator up to the argosy I. gots all kinds of signal
on 3.500, a good 20 over s-9.. switch over to 7.000 and the marker is
very weak.
now..
move to 7.1000 and it's 20 over, weak on 7.2 and 20 over on 7.300
on 80 meters..
3.500 is 20 over while 3.600 is very weak... 3.700 strong, 3.800 weak..
just the opposite of the 40 meter band..
on 20 and up, things seem to be right
so, why does this happen? I am at a loss to explain it...
mike
Mike Bryce, WB8VGE
the heathkit shop
SunLight energy systems
J e e p
o|||||||o
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|