TenTec
[Top] [All Lists]

[TenTec] FS OMNI SIX PLUS

To: <tentec@contesting.com>
Subject: [TenTec] FS OMNI SIX PLUS
From: "Josh" <xppq@ispwest.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 30 Nov 2006 04:29:20 -0800
List-post: <mailto:tentec@contesting.com>
I have  OMNI SIX PLUS  for SALE

the unit is very CLEAN and works well
IT has INRAD # 763 Roofing filter ( centered on 750 hz )
( you can replace component to have centered on 500 hz if desired )
this filter is 600 hz wide and activated by pressing the PROC button
( speech processor)-   the button is OUT for SSB and the internal
speech processor is disconnected !

This OMNI SIX PLUS  has  two 2.1khz inrad filters,  two 400hz INRAD and two
Ten Tec  250 hz -  it has the TXCO option installed. Right now the second
2.1 khz filter is NOT installed but included in accessory box .

It has the W9AC keying waveform mod installed -
the removes any KEY CLICKS or the infamous Micro Chirp
The only side effect - when turning POWER control from zero
to say 70w  there is a DELAY of about 2 seconds !  the rise
time is now  4 ms on the leading edge and the keying is CLEAN
and CLICK free !

Price  $ 1695 plus shipping ( ups insured ) in the USA only -

packing is in original TEN TEC foam BOX 

I was also have an extra brand new ENCODER for the main tuning
if ever needed .  Power Cord, some plugs, operating manual 
( no microphone )

thank you   Josh Logan N7XM  near Reno NV 
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] FS OMNI SIX PLUS, Josh <=