If they don't you can easily order them from McMaster-Carr and have them by
Tuesday.
Gary
----- Original Message -----
From: "Ed - K9EW" <k9ew57@gmail.com>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Saturday, October 21, 2006 6:33 PM
Subject: Re: [TenTec] Argosy Allen Wrenches
> The Allen wrenches are 0.050" and 0.060". I'll bet TenTec has them.
>
> 73,
> ed - k9ew
>
> On 10/21/06, JT Croteau <jt.w6fo@gmail.com> wrote:
> > In my efforts to fix the dial indicator on my Argosy 525, I am having
> > a real hard time finding the right size allen wrenches for the smaller
> > set screws on the front panel knobs. I've found the proper size at
> > Home Depot for the larger of the set screws.. the band and mode switch
> > knobs. However, the smallest Allen at Home Depot/Lowes are too big
> > for the remaining knobs. The Argosy originally came with the two
> > Allen's required but weren't passed down from owner to owner by the
> > time I finally acquired mine.
> >
> > Any ideas?
> >
> > Thanks
> >
> > --
> > <>< JT Croteau - W6FO - Canton, GA
> > ARS #2,147 | NoGA-QRP | SEDXC | SECC | ARRL
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|