TenTec
[Top] [All Lists]

Re: [TenTec] Using the 302R remote keypad with the Orion

To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] Using the 302R remote keypad with the Orion
From: "DAVID LEDUC" <n1ix@verizon.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 22 Aug 2006 19:10:04 -0400
List-post: <mailto:tentec@contesting.com>
Mine works the same way. The upper left button on the Orion is "1" the upper
left button on the remote is "7". 
The "1" button on the remote selects 160 meters as does the "1" button on
the Orion.

Dave N1IX




-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of Jerry.Van
Sent: Tuesday, August 22, 2006 2:58 PM
To: tentec@contesting.com; orion565@yahoogroups.com
Subject: [TenTec] Using the 302R remote keypad with the Orion

>>>
I'm waiting for some additional input from TT service and in the mean
time I'd like to solicit some advice from others who are using the 302R
with the Orion I or II.  Just yesterday I received a 302R and it seems
to me that selecting bands from my new keypad does not match the
description given in the manual nor does it make logical sense to me.

For instance if I press the upper left button on the Orion panel 160m is
selected.  If I press the upper left button on the remote 15m is
selected.

If I press the lower right on the panel 10m is selected.  Lower right on
the remote selects 40m.

It seems to me that my remote does not match the description in the
manual and it would be a bit confusing if pressing a button on the
remote having the same physical location as the panel causes a different
band to be selected.  If you are a 302R user how does your remote
operate and does it match the description in the manual?
          --------------------------------------------
I've exchanged a couple of emails with Paul Clinton and here is his 
response.  "Sorry to say that the manual is incorrect. The software 
engineer picks up the button press by the number on the button not the 
position."  So, as an example, to select 160m on the Orion front panel 
one presses the upper left button and the lower left button on the 
remote.  To select 40m press the upper right button on the panel and the 
lower right on the remote.  And so on.  Confusing but I'll just have to 
get used to it.

Jerry  N8BM
 


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>