TenTec
[Top] [All Lists]

Re: [TenTec] Which HF directional antenna?

To: <dock0evz@earthlink.net>,"'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] Which HF directional antenna?
From: "Duane Calvin" <ac5aa1@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 21 Aug 2006 17:43:43 -0500
List-post: <mailto:tentec@contesting.com>
How small do you need?  The Tennadyne T-8 log periodic will cover 20, 17,
15, 12, and 10m.  Or you could go with the Force12 C3s or C3ss for a really
short boom (tho it doesn't do as well on the WARC bands).  Those would be my
choices for smaller high band antennas.

        73,  Duane

-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of W.D. (Doc) Lindsey
Sent: Monday, August 21, 2006 1:51 AM
To: QRP-L Reflector; Ten Tec Reflector
Subject: [TenTec] Which HF directional antenna?

Dear Gang:

Well I am finally ready to buy and install a directional antenna for at
least the higher HF bands.  Been a ham now for 46 years, but have only used
wire antennas (dipoles, inverted vees, wire ground planes, long wires.  For
5 years I had a 560' horizontal loop up 33 feet suspended  by wooden
telephone poles in North Dokata.  All of the antennas worked after a
fashion, and sometimes surprisingly good results were obtained.

I have also used GAP Titans in two QTH's with excellent results overall.  I
may put up here in central New Mexican, as well.  BUT I right now to put up
a yagi of some sort, for at least 20M - 10M.  Maybe including 6 M as well.

There are no covenants or restricts here, and our asl is close 7000, so
maybe the yagi would not to have a very tall metal tower.  ANYWAY, what
suggestions do you have.  And fire away, because I honestly know practically
zilch.  There are some excellent fellow QRPers nearby who would make their
expertise and strength available.  

So what an effective, durable antenna system you might recommend?  I will
happily receive all suggestions and put them into the mix.  Thanks in
advance for any help you might offer.

73,
---Doc/K0EVZ   PS I would be willing to call some of you, on my dime, to get
this process underway.   Lately I have missed several DX stations,
apparently due to low power on my end.  And conditions of course have their
own challenges.
W.D. (Doc) Lindsey
dock0evz@earthlink.net
EarthLink Revolves Around You.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>