Were you running the rf gain wide open??
S
----- Original Message -----
From: "Paul DeWitte K9OT" <k9ot@mhtc.net>
To: <tentec@contesting.com>
Sent: Wednesday, August 09, 2006 10:21 AM
Subject: [TenTec] Jupiter NR
> This year I took Pegs (KB9LIE) Jupiter on vacation. It has the latest
> update
> firmware.
> When I pushed NR to see if I could get rid of some of the atmospheric
> noise,
> I lost all receive audio. I tried this several times thinking that maybe I
> was not tuned right on freq to the station calling. Disengage NR and
> everything is OK again.
>
> Has anyone else had this problem? Am I doing something wrong?
>
> Otherwise the rig worked great. The new firmware with the narrower filter
> selection was much better than previous selection which I think was 300hz
> in
> the narrowest position. With the filter selection below 300hz, much of the
> noise dissapeared.
>
> I took the cooling fan from my Omni VI+ to put on it and the heat sink
> never
> felt a bit warm.
> We also worked some of the list members. THANKS!
>
> 73 Paul K9OT
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.405 / Virus Database: 268.10.8/413 - Release Date: 8/8/06
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|