TenTec
[Top] [All Lists]

Re: [TenTec] ATU for Scout?

To: tentec@contesting.com
Subject: Re: [TenTec] ATU for Scout?
From: Jerry Volpe <kg6tt@arrl.net>
Reply-to: kg6tt@arrl.net,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 09 Aug 2006 10:39:07 -0700
List-post: <mailto:tentec@contesting.com>
My recommendation is the little LDG Z-11 auto tuner. It is very, very, 
small. Painted black like the Scout. Matches a wide range of impedances. 
Has a very capable LED style SWR indicator. Requires next to no power to 
operate as it uses latching relays. And the Z-11's power rating of 60 
watts intermittent (CW and SSB), and 20 watts continuous makes it a 
perfect match for the Scout (puts out 20 watts in tune position). I have 
a Scout in my car with a Z-11 on it and a Scout in the station with 
another Z-11 on it. I am very pleased. They are no longer available new 
but there are so many of them out there they are easy to find. The Z-11 
was sold both in kit and factory assembled versions. I see the used 
prices from $65 to $100 or so. One point to remember, LDG has released a 
number of processor versions for the Z-11 with version 1.6 the most 
current. They all work but later versions tune faster under some 
conditions. The lastest version, version 1.6, has memories and is way 
cool! Anyway, if you buy one of these used have them pop off the cover 
and read the version number on the white sticker on the processor chip. 
You can buy the latest processor for around $30 from LDG.

73,

Jerry, KG6TT
Fairfield, CA
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>