Thanks to all who replied.
I found information on Shure web site but need more information.
Seems from what I can get from the web site that the color code is as
follows:
White = mic
Green = ground
Shield = should go to same pin on OMNI V as green wire.
This leaves two wires:
Red and Black.
Shure says that the Red and Black wires control an external relay.
Seems they are to activate the OMNI V relay and one of them should go to pin
#3 on the OMNI V.
Question is which one?
So, from what I can tell here is the way plug to OMNI V should be wired.
White = mic to pin #1
Green and Shield = to pin #2
But which one, Red or Black should I connect to PTT or pin #3 on the OMNI V?
I may be over looking something on the web page but I do not see an
explanation of which wire to connect for relay trip.
Or, when to use one over the other.
Thanks as always,
Dan/N4VET
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|