It is really bad when someone cannot make a factual and truthful remark
about one of Ten Tec's products and then get royally chewed out for being a
whiner and a cry baby.
There needs to be a reality check here, and if the comments or remarks are
honest and turthful, then they should be take in that light. It is human
nature to be impatient especially when you have paid a large sum of money
for a product that is still not fully functional, or is not functioning in
the way it is supposed to.
So, have a little patience yourself and bear with others impatience and
don't jump down their throats for expressing themselves. Toby W4CAK
----- Original Message -----
From: "Brad Bradford" <y2kbrad@hotmail.com>
To: <kc9cdt@aol.com>
Cc: <tentec@contesting.com>
Sent: Sunday, June 11, 2006 8:52 PM
Subject: Re: [TenTec] Orion SP on 2.056 vs 1.372
> Lee and others, PLEASE TAKE OFF YOUR BIB AND PUT DOWN THE BABY BOTTLE AND
> TAKE THE BABY FOOD OUT YOUR MONTH. What I'm trying to say is quit whining
> and crying like a baby. Those of us that understand for the "MONEY and
> TECHNOLOGY" Ten Tec is light years ahead of the "JAP-JUNK"!! If you have
> purchased the $10,000.00 Y-7800, you have to return it to the Repair
Center
> to have Roofing Filters installed - NOW THERE's SOMETHING TO CRY ABOUT!!
> $10,000.00?? What did Bartum & Bailey say - "There will always be people
> that have more money than brains"!!
>
> Lee have you expressed your concerns to DITSNBITA@TENTEC.COM?? IF NOT,
> THERE IS WHERE TO EXPRESS YOUR ISSUES, BECAUSE THEY CARE AND WILL CORRECT
> YOUR ISSUES IN DUE TIME. THOSE OF US ON THE REFLECTOR, CAN'T DO A DAMN
> THING ABOUT IT AND MOST OF US DON'T CARE TO WHINE and CRY about a Company
> who is Leading the rest of the Industry out of the dark ages. "WE
> UNDERSTAND THIS TECHNOLOGY AND RADIOS ARE A WORK IN PROGRESS". This
> technology, this Company, the OrionII/Jupiter may still need a Nose job, a
> Belly tuck and a little BOTOX in the Lips, BUT THESE BEAUTIES ARE THE BEST
> BANG FOR THE BUCKS!! SO ENJOY WHAT YOU HAVE, BE PATIENT - THE BOTOX LIPS,
> NOSE JOB, AND BELLY TUCK are coming REAL SOON and Lee 'YOU WON'T HAVE TO
> RETURN IT TO YOUR PLACE OF PURCHASE TO HAVE THE UPDATES INSTALLED!! She's
a
> BEAUTY!! Ooooooooooooooooo, I sorry, I failed to mentioned that someone
> will request that Ten Tec do a Laser treatment to remove the facial hairs
> and those hairs growing in the Nose, ALBEIT the Nose job was the best ever
> done in the Industry. Then someone will want the color and length of the
> Nails changed!! Getting my point?????????
>
> <html><DIV><FONT color=#009966>With appreciation(!!) </FONT></DIV>
> <DIV><FONT color=#009966></FONT></DIV><FONT color=#009966>Very truly
yours,
> </FONT>
> <DIV></DIV>
> <DIV><FONT color=#009966></FONT></DIV><FONT color=#009966><IMG height=12
> src="http://graphics.hotmail.com/emsmile.gif"; width=12>Brad Bradford<IMG
> height=12 src="http://graphics.hotmail.com/emsmile.gif";
> width=12></FONT></html>
>
>
>
>
> >From: Kc9cdt@aol.com
> >Reply-To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
> >To: tentec@contesting.com
> >Subject: Re: [TenTec] Orion SP on 2.056 vs 1.372
> >Date: Sun, 11 Jun 2006 10:28:26 EDT
> >
> >The SP, NR, etc is effectively broken on V2. Hopefully TT is working on
> >all
> >that area (DSP). Until then, I just don't use any of it.....
> >
> >Kind of makes you think you have 2/3 of what you paid for for now
anyways.
> >
> >I find I am happier with OII when I just don't use any of the stuff that
> >screwed up.
> >
> >73,
> >Lee, KC9CDT
> >_______________________________________________
> >TenTec mailing list
> >TenTec@contesting.com
> >http://lists.contesting.com/mailman/listinfo/tentec
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|
![http://graphics.hotmail.com/emsmile.gif"](http://graphics.hotmail.com/emsmile.gif"){kind=link}