I have a Omni 6+ which has a very intermittant problem. I have been unable to
determine any temperature affects, pushed and proded, tightened all the screws
on the boards. Here is the issue...the frequency display will flicker brighter.
When it does the external keyer will not key the rig. The audio will guit as
well. The meter lamps DO NOT flicker, just the frequency and time display. The
problem is less prominant with the top cover off. Also the problem is more
likely to occur when first turned on although it will act up at various times
throughout the day. At this time it has been well over a week since the last
occurance. A few weeks ago I did a reset which seemed to resolve the problem
but eventually it came back....any thoughts- ideas would be greatly appreciated
.....Tom N4RS
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|