I've played with this for quite a while. The ONLY way I can get the VFO
mode to track is IF I have assigned an alternate VFO to the SUB-RX. If, for
example, VFO A is on 14.300 USB and you've just come from 80 metres and the
B VFO is on 3.810 LSB. With NO VFO assigned to the SUB-RX hit the A>B key.
Guess what, VFO A and B are at 14.300 but VFO B stays in LSB! If VFO B is
assigned to the SUB-RX (even if no antenna is assigned to the SUB-RX) the
two VFOs will be in USB.
So the moral of the story is keep the SUB-RX assigned to VFO-B unless
otherwise needed.
73,
Rick
VE7TK
Website: http://www3.telus.net/ve7tk
------------------------------------------------------
To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] V2.055 bug /watch out on 60
meters!AlsoeffectsO2v2.032!
From: "David W LeJeune, Sr" <lejeuned@centurytel.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 19 Apr 2006 16:30:38 -0500
List-post: <mailto:tentec@contesting.com>
I just checked my O2 - when you hit A>B or B>A, the mode does transfer,
as does the BW and PBT if they are set to track in the RX Menu
I'm using 2.032 firmware
Dave K5WNV
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com] On Behalf Of Bob Henderson
Sent: Wednesday, April 19, 2006 4:10 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] V2.055 bug /watch out on 60 meters!
AlsoeffectsO2v2.032!
This IS a problem Larry. When you need to split you shouldn't need to
remember the mode you last used on the second VFO. You just want to
split.
The solution is simple. A>B or B>A should transfer mode as well as
frequency. Who wants to split frequency and mode at the same time?
Nobody I know, that's for sure. I've lost count how many times this fix
has been asked for.
I don't know why but this seems to be a concept the fellas at Ten Tec
struggle with.
Bob, 5B4AGN
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|