TenTec
[Top] [All Lists]

[TenTec] Corsair II problem question?

To: tentec@contesting.com
Subject: [TenTec] Corsair II problem question?
From: OTAKEBI@aol.com
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 25 Mar 2006 20:11:03 EST
List-post: <mailto:tentec@contesting.com>
Have a Corsair II that seems to be developing a problem, I think.
Seems that if rig is turned off for a day or so I get very low s-meter  
readings and low signal levels.
If I switch the mode switch from ssb to cw and back signal levels come up  to 
normal and so does the s-meter.
When I switch from ssb to cw I hear a relay click but only one time.
If I turn the rig off and on after the fix the problem does not happen  again 
unless the rig stays off overnight.
Any ideas before I dig in and try to see what is going on from anyone  who 
has had the problem and fixed it? 
Thank ahead of time,
Dan/N4VET
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>