Hi,
the corsair pto is like the delta 580 and triton IV. I have dis-
assembled,cleaned and re-greased 2 tritons and my delta. Takes about 45 minutes
for the 1st one then even less when you been there before. there is a 3 ball
ball bearing and the the pto has a shaft inside a shaft along with a worm
drive. everything in there rides in the grease that turns into a tar like
substance with age. I use isopropyl and a ton of q tips to clean it all out
then re-grease with a synthetic. effortlessly smooooth when all finished. It's
worth the 45 minutes of time for the end result.
Larry N1YW
-- bruce bennett <k2pdj2000@yahoo.com> wrote:
Not wanting to tear down my pto, I tried to lube the
shaft of the pto with wd 40. Seemed to help but far
from curing the freq shifts I was experiencing when
tuning the rig. So decided to try something different.
I have on hand a product called Tetra 500. It is a
polymer and not a oil. Very fine particles in the lube
are rubbed into the surface of bearing mechanicaly.
Since it is synthetic it should not harden. So first I
sprayed the shaft of the pto with tuner cleaner and
ran the dial up and down the band several times.
Seemed to help loosen up that stiff grease in the pto.
I then applied one drop of the tetra product with a
screwdriver and sprayed again with the tuner cleaner.
My idea was to help the tetra to penetrate into the
pto, with the thin tuner cleaner, and it seemed to
work. I have had this rig since 1984 and can not
recall it working any better than it is now. No shift
in freq and very easy to turn. Will it stiffen up in
the future? I don't know, but the advertisement says
tetra is rubbed into the microscopic pores of the
metal so I am hopeful that it is a permanent cure. Btw
i do not sell or work for the company.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|