Folks, lets look at the REAL numbers:
RG-213 length = 100 ft
Frequency = 10 MHz
SWR = 30:1 {thus load Z = 1500 ohms}
100 watts in results in 31.5 watts out
RG-58 length = 100 ft <Do you actually dare to use the stuff?>
Frequency = 10 MHz
SWR = 30:1 {thus load Z = 1500 ohms}
100 watts in results in 17.4 watts out
Yes it is a waste of power but hey, it's not a bad as some prophesize.
73
Bob, K4TAX
----- Original Message -----
From: "mgoins" <mgoins@mail.ev1.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Sunday, January 22, 2006 2:10 PM
Subject: Re: [TenTec] What makes the 238 good or any other tuner good?
>
>>I agree that using a shack-end tuner, through coax, to an non-resonant
>>antenna is a pretty inefficient way to do things. It's one of the best
>>ways I know
>>to attenuate a 100 watt transmitter output to about 5 Watts, ERP.
>>
>
> ----------and I've worked all over the world through a tuner with one
> watt, cw, ssb, and psk. All depends on a lot of variables. This is not a
> simple "this works- this won't" discussion.
>
> mike
> k5wmg
> one watt all the time
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|