Sorry, all I know is what K4VUD posted. You'll have to ask him about the
further details.
73
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com]On Behalf Of Robert & Linda McGraw
K4TAX
Sent: Thursday, January 05, 2006 8:18 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] FW: [DX-CHAT] fire danger in amp
Well, what let loose in the PSU and what actually burned? We'd all like to
know for future reference and maybe avoid a similar incident. Not to
mention advanced excitement.
73
Bob, K4TAX
----- Original Message -----
From: "Ron Notarius WN3VAW" <wn3vaw@verizon.net>
To: "Ten-Tec Reflector" <tentec@contesting.com>
Sent: Wednesday, January 04, 2006 10:49 PM
Subject: [TenTec] FW: [DX-CHAT] fire danger in amp
> FYI -- please send any responses to direct to K4VUD at k4vud@hotmail.com
>
> 73, ron wn3vaw
>
> -----Original Message-----
> From: Charles Harpole <k4vud@hotmail.com>
> Sent: Wednesday, January 04, 2006 10:46 PM
> To: dx-chat@njdxa.org
> Subject: [DX-CHAT] fire danger in amp
>
> I just had a scare.... After a 6 month of being off, I turned on my Ten
> Tec
> Titan (the first version) and it blew the fuses with a big arc in the amp
> box. Of course, I put in new fuses and turned it on again (without
> checking
> for interior faults--first mistake) thinking it was an arc in the final
> tank, maybe. With new fuses, I turned it on again.
>
> This time a huge pop and flash in the power supply box (separate from the
> amp box), smoke, smell of burning, AND A FIRE INSIDE THE POWER SUPPLY !
> The
> fire showed real blaze inside for about a minute and then lots of smoke
> came
> out.
>
> The point of my story is that I had the power supply sitting on a piece of
> cardboard on top of a wall-to-wall carpet, and it was under my bench in a
> tight spot with a very heavy rig in a cardboard box in front of it.
> Morale
> is that if it had burned a bit longer, it may have caught my house on fire
> and it was placed so that jerking it out was very difficult. I did get it
> out with great difficulty and put it outside on the concrete deck. I do
> have a master AC kill switch which I turned off fast, but ......
>
> Somthing to think about when placing radios in hard-to-reach spots. WOW.
>
> 73
>
> Charles Harpole
> k4vud@hotmail.com
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|