Tom I know you said your 100% CW Fan but by chance did you check the SSB
side and see if the same problem is there also. I don't have a Omni 6 +
any more but thought I'd just ask the question, and good luck, 73 Mac
David S. McCallum/USAF RET./CMSGT/W7SAC/4
----- Original Message -----
From: "TOM" <n4rs@iamotelephone.com>
To: <TenTec@contesting.com>
Sent: Thursday, November 10, 2005 8:19 AM
Subject: [TenTec] Sick Omni 6+
100% CW, here are the symptoms.
Display flickers, when it does I'm in trouble. These symptoms are very
intermittent.
*Outboard keyer does not key rig
*incoming sigs have a chirp
*sometimes no audio
*when the audio goes, the "S" meter doesn't work
Usually does the above from a cold start. Pushing and proding does
nothing. When the display gets dimmer everything works ok. When it gets
brighter one or all the above takes place....any help appreciated....Tom
N4RS
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|