Can anyone help with my problem. My CORSAIR II, after warm-up will shift
freq. down about 600 cycles. The problem seems to be in the double sideband
generator board, as after the shift, the three adjustments to the 9.000 mhz
xtal require realignment.
I have tried heat in this area with no conclusive results. I have also
checked the 8.0 volt regulator voltage and it does not move.
If anyone has had this problem and corrected it, please let me know, I would
be most grateful.
Bruce W1GBS at blanning@acadia.net
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|