I have tried the reset button, no change. I guess I
will pull the boards and try some resoldering, Thanks
for the info.
--- Vic Klein <vhklein@ptd.net> wrote:
> Curious problem. With the "dashes" showing and a
> battery connected, have you
> tried the reset button on the side? Failing that
> "fix" I would look at the
> connections of the boards (particularly the main
> logic board) to see if
> reseating them helps.
>
> =Vic=
> WA4THR
>
------------------------------------------------------------------------
> To: tentec@contesting.com
> Subject: [TenTec] Problem with Paragon I
> From: Roger <zrdc28@yahoo.com>
> Date: Thu, 25 Aug 2005 13:54:13 -0700 (PDT)
> List-post: <mailto:tentec@contesting.com>
>
> I have a very excellent Paragon that I have had for
> about 12 years. It has worked flawless all the time
> until now. The problem is that if you turn the rig
> on
> and then the power supply it works great unless the
> battery is connected. If you have the power supply
> on
> and turn the rig on it will never show anything but
> dashes and will not receive or transmit. If the
> battery is connected it will never come on
> regardless
> of how you turn it on. I have changed batterys and
> can
> find no problems. I did call the tech at Ten Tec and
> he did not have any ideas, any ideas would be
> appreciated. I sure hate to send my beautiful
> paragon
> back but I may have to.
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|